SmartMoto dan SmartClip

SmartMoto a Motorola mobile phone software unlock. This software is compatible with SmartClip Unlocker tool specifically made for the Motorola phones.
Many things we can do with this software. One of them is functioning M702iG phone that can not be used in Indonesian operator's network.
Motorola's mobile phone output in theory this can only be used in Japan with its FOMA network.
But by using SmartMoto and we can memfungsikannya SmartClip simple manner.

How to unlock M702iG network with SmartClip:
1st. Connect the phone to the computer through phone order SmartClip-USB cable-SmartClip-LPT Cables-Computer.
2. Connect S-Card to a Computer.
3. Connect Power Supply to SmartClip.
4th. Turn on the phone.
5. Run the software "SmartMoto"
6. Choose "Smart-Clip USB port" in "phone connection window"
7. Press "search" Software will detect:
a. S-Card
b. SmartClip
c. The connected phone
8. Click the "prepare phone"
9. Select appropriate model from the list.
10. Give a check V mark on the option "unlock Automatically" and press "prepare a Test-Point Smart."
11. Preparation process running.
12. Windows appear to indicate the Smart Test Point cable. Perform the following steps:
a. Disconnect the phone, and also Casingnya.
b. Make sure the LCD too loose.
c. Smart Connect Testpoint to RJ-45 port of SmartClip.
d. Connect the data cable to the phone.
e. Connect the battery clamps to the battery connector.
f. Connect needle A to Testpoint A, and resistant to inform the software to be released.
g. Click OK in SmartMoto. The phone must be detected with boot version 0:00
13. Disconnect Testpoint when SmartMoto informs.
14. Unlock process is then completed.

Do not use the battery from the outside, simply use the existing battery clamps on Testpoint cable, and confirm the connection.

When you do not want to assemble, can also be ordered directly from Reseller SmartClip existing in Indonesian.

At Smart Testpoint Testpoint consists of two, and a battery clamp:
Yellow - Testpoint A (Primary)
Black - Testpoint B (Secondary)
Red - Battery Connector Brace

NB: If the process failed to use Testpoint Unlock A, do the following steps:
Use two Testpoint. Testpoint A to TP Testpoint connect A and B to TP B.

Posted in: Motorola